Dryer Vent Cleaning Tips to Dry Clothes Faster
Do your clothes always seem to take forever to dry in the dryer? Are you constantly running back and forth between the laundry room and the kitchen, trying to find something else to do until your clothes are finally ready? If so, it might be time for you to give your dryer vent a good cleaning. We should also mention that cleaning the vent can reduce the risk of fire hazards. So take a look at these dryer vent cleaning tips that will help you clean your dryer vent and get your clothes dried faster!
Our Top Dryer Vent Cleaning Tips
Dirty vents are not something to ignore, along with being a fire hazard, dirty vents can also make your dryer stink, run inefficiently and use more energy than necessary.
DIY Dryer Vent Cleaning Guide
Let’s get started with our top dryer vent cleaning tips and guide here:
- Start by unplugging the dryer from the wall. Then remove the vent hose from the back of the dryer and check it for any blockages or clogs. If you find any, make sure to remove them carefully.
- Thoroughly vacuum the hose, as well as the back of the dryer, to make sure all particles and lint are removed. You can also use a brush to help loosen any stuck lint. You can find specially made brushes at home improvement stores for this task as well.
- Next, go outside and remove the vent cover. Use a vacuum cleaner hose with a brush attachment to get rid of all the lint and debris in the vent itself. Be sure to move the brush around as much as possible so that it can reach into corners and crevices.
- Once you’ve vacuumed up as much of the lint and debris as you can, use a dryer vent cleaning brush or a vacuum brush to loosen any remaining lint or debris from the walls of the vent.
- After you’ve cleaned the vent, reassemble it and then vacuum up any remaining lint or debris from the outside of the vent.
- Finally, reattach the vent hose, plug in the dryer, and turn it on for a few minutes to make sure everything is working correctly.
Clean the Lint Trap and Lint Trap Vent Area
Next, it’s time to clean the lint trap vent area and the lint trap.
- Remove the lint trap from the dryer and vacuum around the area thoroughly. Also, clean out the vent opening with a dryer vent cleaning brush or vacuum attachment to make sure that all lint and debris are gone.
- If the lint trap has built up dirt and grime, you can wash it off with mild detergent and some warm water.
- Once the lint trap is clean and dry, you can put it back in.
- Run a few loads and see if your drying times are improved with a clean vent! If they’re not, it might be time to check the lint trap or contact a professional for help.
Tips for Maintaining Dryer Vents
Cleaning your dryer vent is only half the battle; you also need to make sure that it stays free from lint and debris.
Here are some tips for keeping your vents clean:
- Clean out the lint trap after every use. This might seem like an obvious step, but it’s often overlooked or forgotten.
- Regularly check the outside of your dryer vent for any signs of lint build-up or clogs and clean them.
- Have your dryer inspected and serviced regularly by a professional to ensure that it’s working correctly and efficiently.
With these dryer vent cleaning tips, you can make sure your dryer runs more efficiently and safely, avoid fire risks, and get your clothes dried faster. So before you find your dryer not working anymore, take some time now to give your dryer vent a good cleaning – your clothes will thank you! And for any dryer repair issue big or small, you know you can always call Reliable Appliance Service!
Mon - Sun : 24 Hours
Overview