Reliable Appliance Service

Common Problems and Fixes When Your Electrolux Dryer Won’t Spin

Elijah K.

When your Electrolux dryer won’t spin, it can throw your household tasks into disarray. If you’re currently facing this issue, we want you to know that you’re not alone, and there are some simple Electrolux dryer troubleshooting steps you can do to fix this problem.

Why Your Electrolux Dryer Won’t Spin and How to Set Things Right

The first step in dealing with an appliance issue is understanding what could potentially be causing it. We will get into why your Electrolux dryer won’t spin and walk through how to fix your dryer in this guide!

Issue #1: Broken Drive Belt

Your dryer’s drive belt is a long, thin belt that wraps around the dryer drum and the motor pulley. Over time, this belt can break due to wear and tear. If your Electrolux dryer won’t spin, a broken belt could be the culprit.

  • To check if the belt is the problem, reach into the dryer and turn the drum by hand.
  • If the drum spins easily, the belt might be broken. Visually inspect the belt for signs of damage.
  • If it’s broken, you may need a technician to give you an Electrolux dryer belt replacement.

Issue #2: Issues with the Dryer Door

The door switch is a crucial little component. When the door is closed, this switch signals the dryer that it’s safe to start a cycle. If your Electrolux dryer won’t spin, a faulty door switch could be standing in the way of your laundry progress. If the door is jammed or isn’t fully closing, this can also cause your dryer not to spin.

  • You can verify this by checking the dryer light. If the light remains on even when the door is shut, it’s likely the switch is defective and needs to be replaced.
  • Start by making sure nothing is blocking the door from fully closing and latching shut.
  • Replacing a door switch can be a bit complex, so you’ll likely need to call a professional.

Issue #3: Control Lock Activation

If your Electrolux front load dryer won’t spin, or your dryer won’t turn on the control lock might be activated. This safeguard locks the buttons, preventing any changes and stopping the dryer from spinning. You’ll know it’s active when “LOC” appears on the digital display.

  • To fix this, press the “Options” and “Select” buttons together until the control lock light turns off.
  • If this doesn’t turn off the control lock, check your manual for your model.
  • This simple step might be all that’s needed to resolve your spinning issue!

Issue #4: Worn Drum Rollers

Dryers usually have two drum rollers at the back of the drum and sometimes two more supporting the front. These rollers need to spin freely for the dryer to work properly. If the rollers are worn out, this could be why your dryer isn’t spinning.

  • To check if the rollers are the issue, remove the belt from the dryer and try turning the drum by hand.
  • If the drum does not rotate freely, inspect the rollers for wear.
  • If they are worn out, it’s best to replace all of them at once.

Issue #5: Blocked Blower Wheel

The blower wheel circulates air through the dryer drum. If it is blocked, this can prevent the drum from turning. Inspect the blower wheel and housing for any obstructions. If it’s damaged, a technician will need to replace the wheel.

Issue #6: Faulty Idler Pulley

The idler pulley provides tension on the drum drive belt, allowing it to turn the drum. If it is stuck or damaged, this could be another reason your Electrolux dryer can’t spin.

  • Inspect the idler pulley and make sure it spins freely on the shaft. If the pulley is stuck, worn, or damaged, replace it along with the drum drive belt.

Issue #7: Defective Control Board

The dryer’s control board regulates the voltage sent to all of its electrical components. If the control board is defective, it might disrupt the voltage to the drive motor, preventing the drum from turning.

  • Inspect the control board for signs of damage or a shorted component, and if you don’t notice anything a technician can use a multimeter to test for voltage reaching the drive motor.

Issue #8: Faulty Timer

Why is your Electrolux dryer drum not spinning? In rare cases, a faulty timer can cause your dryer to stop spinning. Before replacing the timer, check all the more commonly defective parts. If everything else seems to be working fine, a technician can test the timer using a multimeter. If the timer is defective, it’s time for a replacement.

Issue #9: Drive Motor Failure

If your dryer still refuses to spin despite all your DIY efforts, it’s possible that the drive motor has failed. This motor is responsible for turning the drum and the blower wheel to exhaust the air.

  • To troubleshoot the drive motor, listen carefully for any sounds when you push the Start button. If your Electrolux dryer hums but won’t start, there might be an obstruction in the blower wheel, not a motor failure.
  • However, if there’s complete silence after pressing the Start button, the drive motor could be the issue and may need to be replaced. This is a complex task that’s best left to professionals.

Remember, while we’re big advocates for DIY solutions, some issues may require expert attention. That’s when it’s time to call in the professionals at Reliable Appliance Service. We don’t just provide fast dryer repairs; we’re also well-equipped to handle all your appliance repair needs. Keep your appliances running smoothly and remember, we’re here to guide you every step of the way.

Share by: